What does this mean?  In Cisco’s view of the world this means supporting the transport of Fibre Channel, Fibre Channel over Ethernet, iSCSI, NFS and CIFS in a scalable and dependable fashion.

What is the Nexus 4000?

The Nexus 4000 is the 5th release of the Nexus line of switches (counting the UCS 6100 as a release).  This switch fits in the blade center form factor. It is intended to be used in the place of the Catalyst 3000 and 3100 series blade switches. It is a full featured Nexus switch, very similar to it’s big brother the Nexus 5000.

What protocols will it support?

In keeping with Cisco’s vision of a Unified IO platform in the data center the Nexus 4000 will support Converged Enhanced Ethernet (CEE) (yes, they finally caved on the naming) as well as providing the same reliable transport of iSCSI, NFS, and CIFS that you get with the Nexus 5000.

What blade centers will it work with?

Cisco is playing close to the chest announcing what blade server vendors will support this product.

My initial gut reaction was that HP would not be supporting this product, however I just saw that HP is OEM’ing the Nexus 5020. It would make sense that they would support the Nexus 4000 in their C Class blade centers, though only time will tell.

IBM however has been very supportive of integrating Cisco technology, as well as OEM’ing the Nexus 5000 switch in their portfolio. I fully expect the Nexus 4000 to be supported in the IBM BladeCenter platform, though again I cannot confirm.

Dell also has resold Cisco blade switches, and although they do not OEM the nexus 5000 they have been large proponents of the Nexus solution and unification of IO workloads throughout their platforms.

Is it the same as a Fabric Extender?

The Nexus 4000 is not a Fabric Extender. What is the difference? A Fabric Extender is a really efficient multiplexer. While using a Fabric Extender the main goal is vast simplification. What you end up with is a dumbed down remote line card that provides simple, fast services to your access layer. This is great for most uses, however there are instances where you need to provide richer services. A full function switch like the Nexus 4000 is appropriate in this case.

What does it run?

The Nexus 4000 runs NX-OS, Cisco’s data center switching operating system. This is the fourth release of what was previously named SAN-OS which ran on Cisco’s MDS line of SAN switches. This operating system is shared between the Nexus 7000, 5000, 4000, 1000v,UCS Fabric Interconnect and MDS line of SAN switches. Now you can have a consistent operating system platform from your data center core, all the way down through your blade switches and into your virtualization layer.

When will it be available?

Just like when the 3000 and 3100 series blade switches got announced, we are going to have to wait on the individual server manufactures to announce support at their own pace. My gut feel says we will be waiting a couple months for units to get out, and for the vendor certification process to complete. Though with business picking back up, this product may get out sooner.Similar Posts:

• Simplifying your Data Center with Cisco’s Nexus 2000 Fabric Extender (FEX)
• Cisco Nexus 7000 DataCenter switch released – Welcome to DataCenter 3.0
• Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel
• Cisco NX-OS 4.0 | Next Generation Internet Operating System
• Cisco introduces the C-Series Rack Servers
• Humor inside the Nexus 5000 switch fabric architecture

--Colin McNamara

Cisco Nexus 4000 Blade Switch

The boundary between server team and network team responsibilities has become “fuzzy”

Cisco address’s this issue by putting a switch that can be managed via the same methods common to other network devices inside the ESX cluster. This switch runs the same code that has become standard on Cisco’s Nexus series of Data Center switches – NX-OS.

Prior to adoption of virtualization, when there was a connectivity problem with a host it was quite common for the network team to verify functionality down to the switch port. The server team would do the same. This allowed for each team to focus on areas that met their core competancy. Once we moved from a real switch port, to a dumb bridge inside ESX, lots of finger pointing resulted.

Now, with a Nexus 1000V sitting virtually inside the ESX clusters, the boundary between network and systems teams has been re-estabilished. Now when there is a problem with a host inside an ESX cluster, the network team can use the same day to day troubleshooting tools available to them in other portions of the network to resolve issues faster, and with less finger pointing.

Security controls have been moved further away from the hosts then we would like

A best practice for applying security policy is to apply controls as close to the source as possible. Think of this analogy – Your kids are blasting Radio Disney from their computer. Which of the following do you do?

A. Turn down the speakers at the source

B. Distribute earplugs to all members or the household

Of course, the obvious action is to go to the source, and apply a control (turn down the volume, and tell the kids to clean their rooms). The same principle is valid on the networking side. The best practice is to apply security policies such as VLAN ACL’s and TrustSec policies directly to the switchports that host your switches. Before the Nexus 1000V this was impossible to do in ESX, and forced many environments to move security controls further up into the distribution layer. The side effect of this was that now the security stance from host to host inside ESX clusters was diminished.

The Nexus 1000V brings something called port policies to the table to address this. What these are is pre-configured application security descriptions that are available to you systems administrators to apply in a point and click fashion. Once these policies are applied to the virtualized host, they follow the host where ever it is moved in your virtual cluster.

Provisioning and integrating the networks of VMware ESX clusters with classic networks for most is challenging at best

I wrote an article in march about this specific issue in my post – Challenges integrating VMware into Cisco networks . The core of this issue is that in general that the network integration portions of VMware ESX clusters is not really designed to address server teams , or network teams. In fact, you need to be pretty savy with both portions to successfully integrate VMware clusters into your network. In the real world, you generally find people that are good at one or the other, not both.

By putting a Nexus 1000V in your VMware clusters, you know give the networking teams something they can understand without having to learn Linux, and how it handles bridges (key to understanding ESX networking). With a Cisco switch running virtually inside your clusters, network teams can follow standard core / distribution / access models with the access layer now residing inside the ESX clusters. The network teams can also leverage their existing LAN switching skills for integrating the virtual switches in the clusters with the existing Data Center switching fabrics.

With these roadblocks addressed, Cisco is moving to further the DC 3.0 vision

To realize the DC 3.0 vision, the network inside of VMware clusters had to be under control, and follow the same architectural guidelines that the rest of our network is subject to. With the Nexus 1000V this is now a reality. The next steps withing the DC 3.0 vision to are to extend virtualization and mobility throughout our storage fabrics, and to continue to extend virtualization to the network as a whole, as well as focusing on application virtualization and acceleration to truly realize the vision of cloud computing in the data center.

On the storage virtualization side, Cisco will be using a technology called FlexAttach to enable virtual and physical hosts to change locations in the datacenter without storage team intervention (more on this in a near future post). And on the application virtulization and acceleration side, expect Cisco to continue to enhance it’s existing Application Control Engine (ACE) and Wide Area Application Services (WAAS), and further integrate these into their virtualization offerings.

Want to learn more ?

Introduction to VN-Link network services – Cisco.com

Nexus 1000V overview – Cisco.com

VMware distributed vNetwork switch demo – VMware.com

Challenges integrating VMware into Cisco networks – colinmcnamara.com

Douglas Gourley speaking about how Cisco and VMware will drive Cloud Computing in the Data CenterSimilar Posts:

• Altor Virtual Network Security Analyzer (VNSA) integrated with Cisco’s Nexus 1000v for VMware
• Cisco Nexus 4000 Blade Switch
• Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel
• Where is Colin ? Passing the VCP exam (VMware Certified Professional)
• Simplifying your Data Center with Cisco’s Nexus 2000 Fabric Extender (FEX)
• Is your network ready for Cloud Computing with Virtual Infrastructure 4?

--Colin McNamara

Cisco releases Nexus 1000V virtual switch for VMware

He writes about “the VLAN leaking myth” and how it encourages clients to utilize physically separate network infrastructure in the DMZ’s. Now first things first, I wouldn’t call VLAN leaking a myth. At one time it was a very real and serious vulnerability that was exploited by overflowing the capacity of the switch you were attacking, and causing it to “downgrade” from switch to a hub. Once this happened you now had access to previously protected devices, as well as having the ability to sniff data as it passed through the shared hub backplane.

As he mentions though, this is 8 years ago. Most switches have evolved to the point where backplanes far exceed the traffic that could ever be injected into their switchports. Even beyond backplane enhancements there are many ways to further firm up your security stance – Virtual Device Contexts, not using Layer 3 SVI’s on a DMZ VLAN, utilizing PVLANs, using port security, virtual routing instances, and many more. Of course, there are still many other attack vectors that still remain, but can be mitigated by utilizing features built into the majority of enterprise switches available today.

I think the real question is not “are VLANs safe in a DMZ”. The important question is have you mitigated the probability of compromise (the actual threat) to levels that are acceptable to your business. This question remains whether you have a standalone switch or not. So many times we hear about risk risk and more risk. But risk alone is meaningless in a business context. What is important is combining risk with likelihood. For that I like to use a simple table to come up with the true threat.

For example, as I drive to Fry’s there is the risk of me dying due to a car crash. The impact of me dying is very high (risk) however the likelihood of an accident is low, and furthermore I reduce (mitigate) the latent risk (threat) by wearing my seat belt. So all in all the threat of me dying on my way to Fry’s is pretty darn low.

In a business context this may be that I have public facing web servers and network devices in my DMZ. The impact of them being compromised is that my public image may be tarnished for a short time, and my end users may lose productivity if they are not able to VPN into work, or access the Internet while on premise. I mitigate this risk by using firewalls and both host and network based Intrusion Prevention Systems as well as implementing best security practices on my network and systems devices. The latent risk (threat) remaining is at a level that is acceptable to the business leaders, so the system is allowed.

One question that I have seen coming up more often as we move towards fully virtualized data centers is centered around commingling of virtual infrastructure. There are some hard questions which challenge some practices that we have held true over the years.

• Should you allow sharing of physical memory on a host virtual machine between an internal and DMZ server?
• Should you allow virtual infrastructure from multiple security zones to share a storage array or cluster of arrays?
• Should you allow multiple virtual switches in different security zones commingling on the same ESX or Hyper-V cluster?
• Should you allow virtual firewall and load balancing instances protecting internal and external zones to reside on the same hardware?
• Should you allow virtual routing instances from multiple zones to share a physical infrastructure?

In the past world of standalone systems, the additional cost of providing a wholly separate infrastructure for DMZ environments was relatively low. Each system generally had internal disk, or at most direct attached storage. Network devices themselves were scaled down to support one chassis one function. This fit quite neatly into the Enterprise Composite Network model that was quite common from 1999-2003.

Now, many data centers have moved to the Service Oriented Network Architecture (SONA). In this model the cost of a virtualized data center is primarily focused on foundation elements such as the virtual storage and virtual fabrics, virtualized network, and virtual systems elements. The cost of providing additional virtualized services off these elements is low, however the cost of duplicating the physical infrastructure is quite high on both the capital and operational levels. This is forcing the technical and executive leadership at many companies to take a long hard look at the true threats they are facing in previously physically separate security zones such as DMZ’s, Financial and other secure zones. In the end, they are having to decide whether the threat remaining after their security controls is worth duplicating hundreds of thousands of dollars worth of infrastructure or not.

These are hard questions, with really no single good answer. My gut feel is that over the next few years we will continue the move towards the fully virtualized data center where components such as memory, PCI-X buses, storage and network devices are even further decentralized. This will make the cost of duplicating the infrastructure more and more significant, causing consolidated data center (or compute) fabrics to be the norm. At this point the discussion will move away from securing zones by creating separate infrastructure, to providing end to end security, starting integrated application level security, maybe with TrustSec or a dirivative, all the way down to securing the data at rest on disk. For the time being however, the best we can do is sit down and do an honest appraisel of our security stances, mitigate what we can, and do our best to design data center architectures that provide the flexibility of implementing whatever choice the technical and business leaders agree on.Similar Posts:

• Moving towards a Green Data Center – Truth behind the hype
• Cisco’s Cloud Computing Offering
• About Colin McNamara
• Vote for my VMworld presentation – #3221 Built to fail (shameless pandering)
• Simplifying remote site security with Cisco’s new video surveillance modules on the ISR
• Interesting TechWise TV episode on virtualization

--Colin McNamara

Measuring and mitigating risk involved with sharing virtual infrastructure between DMZ and Internal environments

Dear Candidate:

On August 27, Cisco will introduce a pilot for the CCIE Routing and
Switching lab exam in Beijing, China. The pilot will add a 10-minute
interview that will assess the candidate's ability to apply expert-level
networking skills and knowledge to networking problems that are encountered
on the job. After the lab orientation, a panel of three experts will conduct
a verbal interview with each candidate, asking a series of expert-level
networking questions (questions and answers will be in English). The ability
to correctly answer these questions will affect the exam score. After
completing the interview, the candidate will have the entire 8 hours to
complete the lab portion of the exam.  These scores will then be
calculated and then combined for a total score which will decide a pass
or a fail.

Our goal with this email is to let you know that your day will extend beyond
the normal testing day by approximately one hour.  The additional hour will
be at the end of the day. We hope you find this interview process
enlightening and helpful as we continue to strive for the standard the world
has come to expect from CCIE.

In my opinion this change is both needed and appropriate. In the past couple years, the two main barriers to entry with the CCIE (access to gear, and knowledge) have been lowered with the abundance of training programs as well as dynamips and it’s derivatives for gear emulation. Where in the past you were looking at a minimum of $8,000 dollars for a full lab, now you can run it on your PC at home.

From what I see, this is encouraging engineers to get their CCIE’s earlier in their career. This in itself is not a bad thing. If an engineer has dedicated themselfs to learning all the in’s and out’s of networking technology, then they really have earned the title. The problem comes when people want to take short cuts. They buy a lab of someone in China, or use other methods to get copies of the lab. To them, passing the lab and getting their number is all that is important, not truly becoming an expert in the technology.

While in the short term this may seem like the quick path to a good salary, in the long term everybody loses. Those who have cheated their way to their CCIE (while few and far between) end up devaluing the cert for the rest of us. And at the end of the day, they are just cheating themselves, and will lose their jobs when their true skills are tested.

It looks like Cisco is seeing the same thing that I have just talked about. This pilot program should go a long way into protecting the integrity of the CCIE for years to come.Similar Posts:

• What does it take to pass the CCIE exam?
• My experience taking the CCDE Practical Beta
• It’s on like Donkey Kong – CCDE practical registration is open
• Are you a kick ass engineer looking to grow?
• And it begins again – On the road to my CCIE in Storage
• Where is Colin ? Passing the VCP exam (VMware Certified Professional)

--Colin McNamara

Protecting the integrity of the CCIE lab – Verbal Interviews being tested

I think Rick (5x CCIE) put it best in a company wide email earlier this afternoon  -

Please join me in congratulating Darrel in obtaining his Storage CCIE. There are only 24 double CCIES (RS/Storage) in the world, so he is probably about 1 of 15 or less in the world to hold all three.

What is everyone’s vote what is next in his career?  And, NO, you don’t have a say, Darrel

A) Service Provider

B) VOICE

C) CCDE

Thanks,

Rick Davis

ePlus, Senior Network Engineer

CCIE – Storage, Voice, Security, Service Provider, Routing and Switching (#5672)

Great job Darrel, everyone is really proud of you. and our apologies in advance to the wife for stealing you for choices A, B or C. (My vote is for C)

–Colin

Similar Posts:

• Updated CCIE numbers
• Cisco Certified Design Expert – CCDE – officially released by Cisco
• Passed CCDE written and Recertified my CCIE – Killed two birds with one stone
• About Colin McNamara
• CCIE Party 2008 Recap – Cisco Live Networkers 2008
• Are you a kick ass engineer looking to grow?

--Colin McNamara

Darrel Hinshaw – New Triple CCIE [Storage]!!!!!!!

The CCDE just got VERY real in a big way.The following announcement was posted in the CCDE zone at the Cisco Learning Network. (If you haven’t checked the Cisco Learning Network out yet, I recommend it. Its like NetPro on steriods, but focused around certifications.)

REGISTER NOW for the BETA Practical Exam
Cisco is now registering beta candidates for the CCDE Practical Exam. Cisco has finished development of the second exam needed to attain the CCDE certification, the practical exam, and is now soliciting candidates for the beta delivery.

Cisco will be offering this beta delivery of the exam on October, 1 in Chicago, Illinois at a VUE professional testing center. Only candidates that have a passing score on the CCDE qualification exam may register and participate in this exam. Exam beta pricing is $980US. Register Now by email at:ccdebeta@cisco.com

For my CCIE, it always seemed like a switched turned the moment I put my credit card information in and secured a seat. Before that button was pushed, it was a “future” item to deal with. Once that button was pushed it was a “now” item. Things like going out, having a beer with the guys, video games, etc all got shut down so my focus could burn a hole in the subject matter.

I just sent in my registration email for the CCDE practical. I’ll be in Chicago Oct 1, ready to give it my all. But, the more important lesson I learned from my CCIE was that if you focus your efforts on your lab day, you will fail. However if you focus your efforts consistently over the months before, you have a chance of passing. Now that my registration email has been sent, it is time to turn that focus dial up, lock to the door to my office and earn the CCDE through months of hard work.

See you in Chicago

–Colin

Similar Posts:

• CCDE Practical – Beta candidate deadline August 1 2008
• Passed CCDE written and Recertified my CCIE – Killed two birds with one stone
• Cisco Certified Design Expert – CCDE – officially released by Cisco
• My experience taking the CCDE Practical Beta
• Cisco Certified Architect – Board examination above the CCIE and CCDE
• Protecting the integrity of the CCIE lab – Verbal Interviews being tested

--Colin McNamara

It’s on like Donkey Kong – CCDE practical registration is open

When I work with data center infrastructure I expect the following – clean, remotely manageable, secure devices that runs on the same power and similar cabling, and everything can have a 24x7x4 support contract for hardware replacement. For the most part, you get this when dealing with Cisco, HP, Sun and similar manufacturers.

More often then not (with a few very cool exceptions), when I run into video surveillance infrastructure the video management infrastructure runs on some random third tier manufactured server. It never fails that the video management software is on Windows (normally XP or win2k). I have even seen some systems where the vendor requires you to have a session open to run the software.

And then when you get to the encoders themselves, it never fails. You have two choices.

1. The Uber package that can run a Casino, Identify and track dust mites , and if you point it at space, determine if there is life on mars.
2. Individual dinky encoders that run one or two camera’s each. They have limited encoding choices, limited camera control, no remote management, and normally run on 110 volt system that require different power distribution then the 220 that is common in systems today.

Cisco’s answer to this mess

Cisco has released both a video management solution, as well as a video encoding solution in a network module form factor for the Integrated Services Router (ISR).

The first part of this system, the Video Management and Storage System (VMSS) module fills the following roles -

• Management of multiple video streams from one interface, including IP cameras, 3rd party encoders, and streams from Cisco’s video encoding module
• Streaming of live and archived footage through a web browser interface
• This one is pretty cool – The module can mount external storage via iSCSI. So, in addition to its 160 gig internal drive, you can mount a filer and utilize external storage to scale the system.
• “fast forward” to events, as well as notify security and other personnel through SMS and email

The second part of the system (the module on the left in the picture above) is the Analog Video Gateway Network Module (EV-IPVS-16A). It has a couple functions -

• It can take up to 16 analogue video inputs and encode them with MJPEG or MPEG4 codecs
• You can use the first two ports to output video to a external monitors
• If you are using MPEG4, it can be used as a motion detector (handy for fast forwarding to important events, or triggering alerts)
• It can control pan and tilt cameras. This is good for pointing the camera at the janitor unplugging your servers each night to vacuum
• You can configure analogue contacts as an alarm. This can be bound to a door switch, or even temperature and water level monitors in a remote data center. This one will be very handy.

The third part of this solution is Cisco’s Video Surveillance Operations Manager. It manages, archives, displays and distributes the content that was created and collected on the two previous modules. You would use this if you had many branches to aggregate, or needed to staff a video wall (e.g. casino gaming commission operations). Now, you can run each of these components individually. Buy run together as a whole, Cisco has an enterprise class security solution.

Want to learn more ?

Branch office security page on cisco.com http://www.cisco.com/en/US/products/ps9671/prod_module_series_home.html

Cisco’s product page for the Video Managment Module – http://www.cisco.com/en/US/prod/collateral/modules/ps9671/data_sheet_c78_462225.htmlSimilar Posts:

• Interesting TechWise TV episode on virtualization
• About Colin McNamara
• Measuring and mitigating risk involved with sharing virtual infrastructure between DMZ and Internal environments
• Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel
• Cisco Nexus 5020 and 5010 FCOE video ordering guide
• Cisco NX-OS 4.0 | Next Generation Internet Operating System

--Colin McNamara

Simplifying remote site security with Cisco’s new video surveillance modules on the ISR

1. Layer 2 Tunneling Protcol (V3) static and hairpin configuration example - my buddy Rick was nerding it out in the lab and sent a great configuration doc for L2TPv3 my way. L2TP(V3) is used to create a layer 2 psuedowire across layer 3 routed links. This is a great service provider tool that you can use in your own network, no MPLS needed .

2. SNIA Education – Fiber Channel Over Ethernet – There is a lot of buzz going around right now about Fiber Channel Over Ethernet (FCOE). There is also a lot of misunderstanding about the fundamentals of this architecture. This Storage Networking Industry Association (SNIA) does an outstanding job of covering FCOE at both at an architectural level, as well as going over low level messaging structures.

3. Trill (Rbridge) architecture – IETF internet draft – I think the last time I was this interested in an internet draft was when iSCSI was first being proposed in the IP Storage working group. Trill, in my opinion is basically a light weight version of MPLS / VPLS. It has as far as I can tell most of the advantages of this architecture, without some of the configuration and hardware requirement drawbacks. Fair warning, reading this document started a doc hunt that killed my Saturday.

4. Cisco’s Security Response to Sebastian Muniz’s IOS rootkit – Security is a very important aspect of network design. Sebastian’s IOS rootkit demonstration is going to force some customers who in the past have been “OK” with having older, possibly vulnerable IOS versions floating around to update their operational practices and start keeping their routers and switches operating systems as often as they do their servers. Thankfully, Cisco has been embracing technologies such as kernel virtual machines, in service software upgrades and more to lesson or remove the impacts of software upgrades.

5. Turning Wounded Warriors into Network Ninja’s – As a former Marine (well, always a Marine, formerly employed by the USMC) this program goes straight to the heart. Cisco is partnering with Naval Medical Center San Diego (NMCSD, or Balboa Naval Hospital for us locals) to provide technical training to Marines and Sailors who have recieved service ending wounds in Afghanastan and Iraq.Similar Posts:

• Fibre Channel over Ethernet is taking off
• Cisco NX-OS 4.0 | Next Generation Internet Operating System
• Zone based IOS firewalls
• Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel
• Cisco is using Linux virtualization and 40 core CPU’s for its next generation routers
• Cisco Nexus 7000 DataCenter switch released – Welcome to DataCenter 3.0

--Colin McNamara

Link Round Up – L2TPv3 FCOE Trill Wounded Warriors

Please join me in welcoming John McCool to his new position as the leader of (in my opinion) Cisco’s most strategic business units. Similar Posts:

• Thanks and farewell to Jayshree Ullal
• Jayshree Ullal takes the helm of Arista Networks
• Cisco Nexus 4000 Blade Switch
• How to succede in 2007 – By Tim O’Reilly
• Certguard, Ethan Banks, Network World and Common Sense
• BIG Cisco – VMware announcement – 1:30 Pacific time

--Colin McNamara

John McCool chosen as Jayshree Ullal’s replacement to lead Cisco’s Data Center Switching and Services Group (DSSG)

Please join me in thanking Jayshree for all the positive contributions she has given to Cisco and the industry, and wishing her the best in her future endeavors.

Similar Posts:

• John McCool chosen as Jayshree Ullal’s replacement to lead Cisco’s Data Center Switching and Services Group (DSSG)
• Jayshree Ullal takes the helm of Arista Networks
• CCIE Party 2008 Recap – Cisco Live Networkers 2008
• Cisco Nexus 4000 Blade Switch
• BIG Cisco – VMware announcement – 1:30 Pacific time
• Cisco releases Nexus 1000V virtual switch for VMware

--Colin McNamara

Thanks and farewell to Jayshree Ullal

Legal implications of a breach

Losing control of personal data means means more then just replacing a tape in your backup rotation. Laws vary from state to state, however generally you are required to contact the identity holders who were breached, as well as fund some sort of remediation. This has huge implications on consumer confidence, and at the end of the day stock price of your company. In some cases, such as ChoicePoint a company can be completely decimated by a breach.

Data protection regulations

There are an ever increasing number of regulations that concern the control of sensitive data. These can vary from laws focused on patient data, to financial data, to personal identification data. The most most well known laws are HIPPA, GLBA, and Sarbanes Oxley (SOX). Past that there are laws that pop up every day at the state and municipality level that further increase the requirements and expense of dealing with a breach. In short, it is becoming an expensive and in some cases criminal offense to lose control of your sensitive.

What you can do to protect your backup tapes

First things first, putting a lock on that Iron Mountain box is just not good enough. You must assume that no matter what, a determined attacker will get physical access to your tapes. So many times companies thing that just because their data format is unique or proprietary that an attacker won’t be able to access it. The cold reality is that any format can be read, and yours is not that special.

The only way to be assured that your data is safe is to encrypt it with a complex cipher. In short, you need to treat your data the same way on tape as you would if it was sitting on a public ftp site (with anonymous access enabled). Luckily Cisco has a technology that allows you to encrypt and decrypt your data coming on and off tape. This technology is storage media encryption.

Cisco Storage Media Encryption (SME)

Cisco’s Storage Media Encryption (SME) technology allows for the seamless encryption of your data flows on and off your backup tapes using AES256 standard encryption. Whether you have VSANS segregating your data, a core / edge architecture, or Virtual Tape Libraries (VTL), you can use SME to protect your data at rest, removing the possibility of an attacker getting access to your critical data.

Storage Media Encryption works by leveraging a multifunction chipset available in the 18/4 module that comes default with the 9222i and is an option for the 9500 series director class SAN switches. Chipset has a couple functions, including line rate encryption of iSCSI and FCIP data streams at gigabit speeds, as well as line rate encryption of data as it streams your tape or virtual tape library’s (VTL).

Want to learn more ?

SAN and NAS, Oreilly Press – In the classic Oreilly style by W. Curtis Preston, this book is a great starting place to understanding the fundamentals of San and Nas architectures that many people are likely to face.

Storage Media Encryption for Cisco MDS SAN Switches – http://www.cisco.com/en/US/products/ps8502/index.html . Cisco has lumped together a couple good data sheets here, though I may have to write a future article taking a deap dive on what really drives SME.Similar Posts:

• Identity aware networking using Cisco TrustSec
• Cisco Nexus 7000 DataCenter switch released – Welcome to DataCenter 3.0
• My CCIE Storage Shopping List
• Cisco is using Linux virtualization and 40 core CPU’s for its next generation routers
• Why was Storage Networking my first CCIE? And What did I do to prepare?
• How to succede in 2007 – By Tim O’Reilly

--Colin McNamara

Encrypting your backup tapes with Cisco Storage Media Encryption (SME)

This switch answers a fundamental problem that has been presented by blade centers and VMware. The problem is increasing density of 10 Gig Ethernet, as well as the creation of SAN islands to provide storage access to VMware ESX clusters.  The nexus 5020 provides a solution that address both of these challenges, as well as supporting Fibre Channel Over Ethernet (FCOE) for the eventual move to a consolidated data center fabric in the years to come.

Want to learn more ?

Mastering VMware Infrastructure

Nexus 5020 Video Data Sheet

Unified Data Center Fabric whitepaperSimilar Posts:

• Cisco Nexus 7000 DataCenter switch released – Welcome to DataCenter 3.0
• Simplifying your Data Center with Cisco’s Nexus 2000 Fabric Extender (FEX)
• Cisco Nexus 4000 Blade Switch
• Fibre Channel over Ethernet is taking off
• Is your network ready for Cloud Computing with Virtual Infrastructure 4?
• Cisco releases Nexus 1000V virtual switch for VMware

--Colin McNamara

Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel

In the past couple years, VMware has changed from a product hidden in development and testing environments to a full fledged enterprise computing platform. It brings many benefits to the companies that implement it, however with those benefits come changes to the access layer of your data center. Your access layer is no longer a top of rack Cisco switch, or end of row aggregation chassis. It is now a virtual bridge that exists logically within your VMware ESX server.

This causes an interesting question to come up in many customers – Who is responsible for the configuration and maintenance of this Vswitch? At first glance most groups reference the port on the last Cisco switch as the division of responsibility between network operations and systems operations. This has worked well in the past for a three main reasons.

First, it divided responsibilities based on technical skillset. For example a network engineer understands spanning tree, trunking, routing protocols, firewalling. While a systems engineer understands file systems, databases and Linux and Windows operating systems.

Second, it provided for a interconnection point where standardized configurations could be applied by an operational group, versus complicated configurations that could impact overall network designs and require an architectural board review.

Third it provided for a clean hand off for troubleshooting. Both network and systems operations could agree on layer 2-4 functionality in an area that provided for detailed debugging on both sides.

Lack of a defined access layer

VMware ESX throws a wrench in this model. We no longer have this well defined edge at the access layer. The access layer now exists virtually inside a server. More specifically, it is a logical devices running in a Linux server. This presents a challenge because it requires cross over knowledge. Whoever is responsible for this integration has to be fluent in Linux systems administration , and also fluent in network design and operations. Frankly this is a rare skill set to come across, as it requires and engineer who has attained high proficiency in both systems and network engineering.

I see this fuzzy line of demarcation often as a failing point for many VMware integrations. Many times I see network operations teams not involved in ESX cluster design because its a “server” , and systems operations teams generally don’t have the networking skills necessary to design and implement an fully functional system.. The solution to this problem is education and collaboration.

The need for collaborative design sessions

The single most powerful element in a successful VMware integration is the creation of strong design documents. These are created by holding planning sessions where both your systems and networking leads hash out a strong design that takes both short and long term virtualization and network goals into account. Also, many times when people hear the word design, they think it is a high level Visio and a bill of materials. That is a just a fraction of the effort required. A proper design should cover everything from a 10,000 foot overview Visio down to protocol flow diagrams and configuration examples. By created a detailed design like this it is likely to bring up common issues such as 10 gig aggregation, trunking, VMotion security, layer two adjacency and layer 7 network service delivery on a white board instead of a production environment.

To create this detailed design, both your Network and Systems leads have to understand this product. VMware recognizes this is critical to successful implementation (and to further sales of their product) an offers the VMware Certified Professional certification. If you have the resources, I would recommend sending both your network and systems leads to this training at the same time. Having them attend training together allows them to leverage each others strengths and bring up questions specific to their network and their goals.

A real world example of this is the company I work for, Eplus. Last April forty of us, all senior engineers attended VMware Certified Professional training at the same time. The class was mixed up so there was an even distribution of CCIE’s, Systems Experts, and Storage Experts. Needless to say this presented our instructors with some extremely challenging questions, but more importantly it set the stage and created a venue for collaboration between these different practices within our own company.

Real world benefits

A great example of this model’s success this occurred last month. Rick and I were sitting in the engineering side of our Sunnyvale office, catching up on email after giving presentations at Cisco that morning and afternoon. In the bullpen behind us, one of the Microsoft architects was engrossed in a troubleshooting call with a large customer on the other line. It turns out a large systems vendor (who shall remain nameless) had been trying for a week to integrate the first ESX cluster into this network and just could not get the networking portion to work correctly. Our account manager received the call from a the customer, and asked the technical teams to step in to see if we could help out in any way.

The systems engineers were able to isolate the problem down to the network interconnections, but needed to bring in networking resources to resolve the problem. Rick and I were waved over and were given an overview of the problem and introduced us to the customer the far side of the call. We asked a few questions about the physical and logical architecture of their network and created a diagram of their network on the whiteboard. With this we were able to ask them to execute commands continuously isolating the problem domain until we found and resolved the issue.

Seven minutes had passed from the point Rick and I were waved over to the point the customer had a working installation. This allowed the customer to focus on moving their business forward instead of fixing a failed implementation. Three of us on the call had attended VMware Certified Professional training together. We had spent at a minimum 50 hours each creating a baseline of understanding in class, as well as many discussions in engineering meetings. The solution came in seven minutes not because of any one teams individual strengths, but because of collaboration. The systems engineers were able to isolate the problem domain very specifically. And as network engineers trained on VMware were able to quickly understand and digest the issues, and tie it together with our larger understanding of networks as a whole. Only at that point, when the team was able to leverage each others strengths were we able to address the problem so quickly.

There will come a point in the next few years where this fuzzy boundary between the “network” and the “server” is established again. My call is that this will coincide with Cisco finishing development of their Vswitch that will reside inside the ESX server. This switch will require both Cisco and VMware improve their design and integration guides for ESX which are both frankly lacking substance. Until those detailed architecture, integration and troubleshooting guides exist the key to successful ESX cluster implementation will be a strong cross trained systems and network teams that are collaborating on the next level of virtual network design in your enterprise.

Want to learn more?

Cisco – Integrating Virtual Machines Into Cisco Data Center Architecture

This is Cisco’s main design guide regarding the integration of virtual machines. You can use it as a decent high level overview if you are a network engineer who is curious how VMware ESX, or Xen servers for that matter will fit into your network.

VMware – Virtual networking Concepts

This VMware document goes between high level overviews and detailed descriptions. It is a decent resource for a network engineer, and provides an overview of ESX network features, however it misses the target for providing configuration examples.

Blog of Scott Lowe – Technical Lead for Virtualization at Eplus Technology

Scott is an engineer that works with me at Eplus Technology. He is based out of the east coast and covers servers, storage and virtualization. His blog is chock full of good of information. A recent post of interest was how to enable Cisco Discovery Protocol (CDP) on VMware ESX server network interface cards.Similar Posts:

• Cisco releases Nexus 1000V virtual switch for VMware
• Arista Networks – Their approach to cloud networking
• Cisco Certified Design Expert – CCDE – officially released by Cisco
• Cisco NX-OS 4.0 | Next Generation Internet Operating System
• Resume – Colin McNamara, CCIE #18233
• New features in VMware 3.1

--Colin McNamara

Challenges integrating VMware into Cisco networks

IOS-XE is takes the best elements out of Internet Operating System (IOS) which has its roots in a closet at Stanford, and combines them with the most successful open source technology ever – Linux. Cisco is leveraging Linux virtualization technologies such as Kernel Based Virtual Machines to protect against operating system failures as well as to allow for In Service Software Upgrades (ISSU).

To really appreciate this, we first have to dive down into the overall architectural changes of the ASR1000. The largest change that Cisco has made was to implement separate forwarding and control planes. In the past, Cisco routers would have the processes responsible for forwarding traffic, and the processes responsible for configuring the router running on the same root operating system. The side effect of this is that if you want to upgrade the root operating system of your router, you are going to have interrupt the traffic flowing through it to do so, or have a physically separate route processor to take over while you rebooted. This is a big headache operationally, and effectively forced engineers to design in separate physical chassis to meet high uptime requirements.

What Cisco has done to address this, was to mirror changes made in their storage and carrier routing portfolios. Both of those product lines utilize the operating system to push commands into advanced processors that exist on the line cards themselves. The ASICS on the line cards are designed to work in a distributed fashion, so that production traffic never goes into up into the router processor (or sup engine). This in effect ensures that the control and forwarding planes can exist as independent elements.

If you look at the graphic above, you will notice 3 main zones. The upper zone is what we would normally describe as the control plane. This is where the higher level functions such as your routing processes, ssh daemons, snmp daemons, and shells live. In short, if you you configure or read something, you are going to do it here. The only time traffic flows through this plane is when you are doing a thing called process switching. keep in mind this is a rare occurrence and usually occurs because of an oversight in your network designs.

By separating the control and forwarding planes, this allows Cisco to basically run a management station on the router, that programs chip sets in the line cards on the fly. This in my opinion is where the true power of this architecture comes through. By separating the two functions the software engineers are free to utilize powerful open source technologies such as Kernel-based Virtual Machines, and the Linux kernel, while letting the integrated circuit engineers design blazing fast chips which allow full functionality at line rate.

What benefits should we receive from a virtualized control plane? First, in larger routing and switching chassis (including the top end of the ASR1000 line) you normally have physically redundant route processors (RP)/ supervisory engines(SUP). The operating systems on these RP’s synchronize many things, including configuration, process state, routing tables, security associations and much more. The primary reason for this, is if you have a failure in the active RP, you can failover to the standby RP without interrupting traffic flows.They also can be used to streamline the software upgrade process by only upgrading one RP at a time, and then gracefully transferring traffic to it. Once proper operation is verified, the backup RP can be brought up to the same code revision.In any production environment this is highly desirable, and helps immensely in the battle for five nines.

The ASR1000 takes the redundant RP concept seen in high end chassis, and allows you to implement redundant upgrades, as well as protection against software failure, with only one physical route processor. This is done by utilizing Linux kernel virtualization. Instead of running the control plane directly on the production hardware, a small kernel is inserted. Booting from that are two copies of IOS-XE. These run independently, and synchronize state and configurations just as if you had two physically separate route processors. What this means in operational English, is that where in the past, you would have to either have two devices, or a larger device with redundant RP’s to upgrade without disruption, you can now have that same ease of maintenance, in a much smaller (and at the end of the day, less total cost) package.

Below this is the forwarding plane.It plugs into to a high speed interconnected fabric which all line cards and RP’s are redundantly connected to. In the diagram above, this is the bottom level. Items in this plane include buffer memory, Cisco Express Forwarding (CEF) ASICS, and now the new QuantumFlow processor. This is normally where you would find your DCEF enabled line cards, fibre channel and Nexus7000 line cards, as well as the modules for the ASR1000 routers. When properly utilized, traffic should be relatively isolated to this tier, and function independently from the control plane.

The shining star of the ASR1000′s forwarding plane is a group of chips that is referred to as QuantumFlow. The QuantumFlow architecture itself merges Cisco’s strength in integrated circuit design, with its strengths in IOS software design. In the past, Cisco would design ASICS’s for specific functions, and then write commands down into them. This has worked very well, until they point that a new feature came out that couldn’t leverage the fixed configuration of an older ASIC. Your choice at that point was generally to process switch for that feature (which is slower, and honestly bad form), or upgrade your cards to the newer ASIC design. The QuantumFlow chipset approaches this problem from a new angle. The first chip in the set (Popeye) is designed to be field programmable in C, as well as no fixed internal pipelines. This combined with utilizing 40 cores running between 900 and 1200 megahertz allows the programmers to utilize parallel processing techniques to utilize an immense amount of processing power in real time.

To put things into perspective, remember when you got your first multi core laptop or desktop. You were able to say watch a DVD, as well as compile code at this same time, while continuing to have a responsive workstation. Now imagine what you could do with a 40 core processor. This is the kind of power that we are talking about. Now imagine, that not only is your workstation immensely powerful, but you could also offload common jobs such as running daily builds, or encoding videos to another machine (or in this case processor.

In the ASR1000 this processor is called Spinach (yellow are in the graphic above). And of course just like the cartoon, Popeye’s potential really comes to light when combined with Spinach. Spinach is a separate chip, that is used a a traffic manager. This chip handles queueing and quality of service, ensuring that the proper packets arrive at the proper time, as well as interconnecting with cryptographic offload engines so it can equally apply services to encrypted flows.

At the end of the day, the most important question is not how fast something is, or how cool it is. The question is what can it do for me? By leveraging this new architecture the ASR1000 is now able to do line rate inspection of traffic using Network Based Application Recognition (NBAR), Support 128,000 queues for deep quality of service, secure and encrypt data using zone based firewalls and embedded crypto engines, segregate traffic using MPLS, integrate advanced voice and video functionality, as well as providing fulling Netflow v9 support for all of the above. It provides all of these services in an always on solution utilizing Linux virtualization, as well as leveraging an flexible chip set architecture that allows for field programmable improvements in the future.

My hope is that after reading this article that you are in a better to understand how Cisco is leveraging open source technology and integrated circuit designs to improve the foundation of the internet. In upcoming articles I will be discussing design scenarios utilizing this features in this product, as well as highlighting other areas where Cisco is embracing both open source technology, as well as open architectures that can properly leverage projects such as Linux, Ntop, Wireshark and more. If this article has you interested in learning more about some of the technologies mentioned today, then I encourage you to check out some of the links below, or shoot me and email to be highlighted in a future readers questions article.

Learn more about Linux Kernel-based Virtual Machines

Learn more about Cisco’s ASR1000

Learn more about Cisco QuantumFlowSimilar Posts:

• Cisco NX-OS 4.0 | Next Generation Internet Operating System
• Application Extension API notes – Cisco Live 2008
• Zone based IOS firewalls
• Arista Networks – Their approach to cloud networking
• Simplifying remote site security with Cisco’s new video surveillance modules on the ISR
• Altor Virtual Network Security Analyzer (VNSA) integrated with Cisco’s Nexus 1000v for VMware

--Colin McNamara

Cisco is using Linux virtualization and 40 core CPU’s for its next generation routers

Cisco TrustSec starts at the edge by negotiating a secure link if both hosts support it (802.1ae). This is similar to wireless encryption schemes, where a secure handshake is established and the L2 path become impervious to sniffing. This is user configurable, and to my knowledge the asics available to support line rate encryption are currently only on the Nexus 7000 blades.

The next step is to start 802.1x negotiations. For the people not familiar with 802.1x, it is a way of passing username / password information from your computer up into the network infrastructure. Once this is completed, the switch can not only utilise tools like NAC to place you into the appropriate quarantine, or access vlans, but it also know knows your identity.

Now the “network” is aware of your identity, a new level of granular security control can be deployed across your infrastructure. These security policies can map into “user x can connect to webserver y” instead of being restricted by ip and port. This allows you to utilize true roles based administration similar to what you use in your Windows and Unix file systems, but now you can do this across the network.

How is this done ? I like to think of this as a mix between dscp and mpls tags. Which in a nutshell means that when traffic enters the network it is tagged with a small amount of additional “identity: information which is retained as it traverses the network. This information can be used to augment or completely replace your current ACL based security controls in a way that enables you to more effectively comply with complex regulatory environments such as PCI, SOX, GLBA and HPPA.

Over the past few years we have learned how to leverage intelligence in the the network by utilizing tools like QOS, MPLS VPN’s, and many others. Expect to add Cisco TrustSec to your quiver of tricks to address the ever growing compliance needs faced by today’s network designers.

Learn more about Cisco TrustSecSimilar Posts:

• Cisco Nexus 7000 DataCenter switch released – Welcome to DataCenter 3.0
• Encrypting your backup tapes with Cisco Storage Media Encryption (SME)
• Altor Virtual Network Security Analyzer (VNSA) integrated with Cisco’s Nexus 1000v for VMware
• Cisco releases Nexus 1000V virtual switch for VMware
• Zone based IOS firewalls
• Cisco Nexus 4000 Blade Switch

--Colin McNamara

Identity aware networking using Cisco TrustSec

I was wrong, the Green Data Center is not about saving baby seals, it is about saving cold hard cash. Saving the world is just a nice side benefit.

That being said, saving cold hard cash is a very important discussion item in any IT Operations group as they are normally seen as a cost center. For them, a penny saved is literally a penny earned. Not only can you save money by not paying for power, but PG&E will actually has a budget to pay you NOT to use their power. Most people here this and get a puzzled look on their face. “why would the power company, who makes money on power, not want me to buy it from them?” The answer is that Californians use more power then PG&E can produce at peak times. When they have to buy it from another state it can cost them 10 times or more then they charge us. This is the reason why PG&E will pay you to use less. Each penny they give to the consumer for saving a watt, saves them 4 pennies (80% return on investment).

Great, PG&E saves money by giving it to me. How do I get this cash? Well there are a couple ways to get this.

1. Incentives for new buying new energy efficient servers
2. Rebates for moving to virtualized servers
3. Rebates and incentives for moving to thin client desktop systems
4. Audit teams for cooling and power if your Data Center is 10,000 square feet or more
5. Incentives for airflow control systems
6. Incentives for high efficiency UPS and power distribution systems
7. Technical services for cooling system evaluation (PG&E funded)

That is a pretty comprehensive list of how to get money from the power company, but you can save even more money buy not using the power in the first place. Not unsurprisingly this starts with the server.

First thing you can do, is virtualize, virtualize, and virtualize some more. For most people this means VMware. For others this may mean Xen, or Microsofts virtualization product. Whatever flavor you chose, the key message is to consolidate from many servers to few. A server sitting “idle” still pulls 50% of its max current. Now, howe many servers do you have that are just sitting there? My guess is a large amount. By virtualizing these servers, you allow them to be stacked onto high performance server that can be run at a higher utilization. This lowers the over all power utilization for your DataCenter. Another side benefit is that ever watt that you remove from a server, you get another watt removed from your cooling.

These same virtualization techniques can also be applied to your network devices, which account for 6 to 12 percent of your datacenters power draw.

Ask yourself a few questions

• ” Do I need 4 different firewall clusters?”. It is likely that these are leftovers from organic growth, and that you could consolidate them into virtual firewalls on a more efficient chassis (ASA comes to mind).
• ” Do I need to maintain physically separate infrastructure?”. There are technologies like MPLS, VFR-Lite, Virtual Switching and more that allow you to consolidate onto a shared network infrastructure, taking a service provider approach to providing transport in your network.
• ” Am I running old inefficient gear?”. Power supplies have increased in efficiency over the last few years. There may be a good return on investment for you to upgrade.
• ” Can I consolidate into larger chassis?”. Ask the question, which is more efficient – a closet full of 3560′s or a 4507? There is efficiency in scaling out.

I hope that reading this has caused you to ask some questions, and maybe look at the larger impact of your network operations on both the ecosystem and your operational expenses. With these questions in hand, you might want to talk to PG&E and your Cisco / HP parter about going “Green” in the data center.Similar Posts:

• Is your network ready for Cloud Computing with Virtual Infrastructure 4?
• Cisco’s Cloud Computing Offering
• Usability features in Cisco’s Nexus 7000
• Cisco introduces the C-Series Rack Servers
• New features in VMware 3.1
• Simplifying remote site security with Cisco’s new video surveillance modules on the ISR

--Colin McNamara

Moving towards a Green Data Center – Truth behind the hype

One feature that is new, and frankly extremely exciting is Virtual Device Contexts. Each virtual device runs with its own process, vs the use of tagged differentiators in technologies such as VRF-Lite. This provides for paravirtualized management instances, and clear lines of delineation for both software and hardware for a resource that can be shared between different groups within an enterprise.

Chassis that run NX-OS will support In Service Software Upgrades (NSSU) to allow operations groups to upgrade operating systems with zero downtime. This is accomplished through a combination of modular software architecture, and the decoupling for the control and forwarding planes.

One of my favorite features in SAN-OS is the embedded is fabric analyser. This is a tool that can sniff management traffic without having to plug in a sniffer, or provision a span port. You can dump in real time to a tcpdump like interface in the command line, output to a local file, or map to the ip of a wireshark instance that layer 3 access to the management port. Cisco again has taken the best of SAN-OS and bundled it with NX-OS. You will be able to remotely span management traffic without having to set up rspan, or trudge down to the datacenter to set up a sniffer.

Now, your router can call home right now so that is not a totally new feature. Smart Call Home was released recently into IOS. But that still doesn’t stop it from being a great feature. This allows you to configure NX-OS powered devices to mail an xml formatted troubleshooting email to TAC, and / or your support staff. This has been proven to drop the average time to resolution from 16-30 hours to 6 hours.

Now the drum roll…… All IP routing features are VRF aware. This has been a point of contention with me for a while. As Cisco and the market in general has embraced virtualization as an answer to pressing business concerns of leveraging shared infrastructure, while retaining security controls segregating disparate environments technologies such as MPLS and VRF within the datacenter have become more and more prevalent. That is great, however it never fails that the feature you need at that moment always seems to be coming out in the NEXT IOS release. With Cisco NX-OS 4.0 this is no longer a question.

Now, if I was a CIO and I was reading about all these new technologies that Cisco was pushing with NX-OS, I would frankly be cautious, and rightfully so. The thing is, most of these features are not new, they have been in use, and in production under the most stringent uptime conditions in the world – storage networking. They have been tried and tested on Cisco’s MDS line of storage networking switches. So get comfortable, get educated, but most importantly get on board for DataCenter 3.0.Similar Posts:

• The emergence of MDS features in Cisco’s datacenter networking equipment
• Cisco is using Linux virtualization and 40 core CPU’s for its next generation routers
• New features in VMware 3.1
• Link Round Up – L2TPv3 FCOE Trill Wounded Warriors
• Arista Networks – Their approach to cloud networking
• About Colin McNamara

--Colin McNamara

Cisco NX-OS 4.0 | Next Generation Internet Operating System

Highlights of the the Nexus 7000′s features are -

• 15 Terrabit per second backplane
• Support for 40 and 100 gig ports in the future
• Seperate control and data planes
• link layer encryption
• front to back airflow (FINALLY available in a non NEBS chassis)
• Lossless non blocking fabric (VOQ enabled)
• Fibre Channel, Infinaband, and Ethernet blades in one unified platform
• Cisco Data Center Network Manager (MDS Fabric Manager on steroids)
• Virtual Device Contexts (Network Systems virtualization, the next level past VRF route tags)

You can learn more about this switch in upcoming articles, and at http://www.cisco.com/en/US/products/ps9402/index.htmlSimilar Posts:

• Cisco Nexus 4000 Blade Switch
• Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel
• Simplifying your Data Center with Cisco’s Nexus 2000 Fabric Extender (FEX)
• Interesting TechWise TV episode on virtualization
• Humor inside the Nexus 5000 switch fabric architecture
• Cisco releases Nexus 1000V virtual switch for VMware

--Colin McNamara

Cisco Nexus 7000 DataCenter switch released – Welcome to DataCenter 3.0

CERTIFICATIONS / ACCREDITATIONS HELD

• CCIE – Cisco Systems Internetwork Expert #18233
• VCP – VMware Certified Professional
• CDCUCSS – Cisco Data Center Unified Computing Support Specialist
• VSP – VMware Sales Professional
• VTSP – VMware Technical Sales Professional
• TSS – Cisco Technical Solutions Specialist, Data Center
• GCIH – GIAC Certified Incident Handler
• CCVP – Cisco Certified Voice Professional
• CSNSSS – Cisco Storage Networking Solutions Support Specialist
• CSNSDS – Cisco Storage Network Solutions Design Specialist
• CADCNSS – Cisco Advanced Data Center Networking Infrastructure Support Specialist
• CCIE Storage Networking
• RHCE v4/5 – Redhat Certified Engineer #804006368822511
• RHCT v4/5 – Redhat Certified Technician #804006368822511
• EMCPA – EMC Proven Professional Associate – Information Storage and Management
• NSCA – Netscaler Certified Administrator #2005072
• NACE – Network Appliance Certified Expert #12912
• NACP – Network Appliance Certified Professional #12017 – Data Protection
• NACP – Network Appliance Certified Professional #11985 – Storage Area Network
• NACP – Network Appliance Certified Professional #12911 – High Availability

Retired Certifications

• Cisco Qualified Specialist – IP Telephony Support
• Cisco Qualified Specialist – IP Telephony Design
• Cisco Qualified Specialist – IP Telephony Operations
• Cisco Wireless LAN Design Specialist
• Cisco Wireless LAN Support Specialist

PROTOCOL PROFICIENCY

EIGRP, OSPF, RIP, BGP, MPLS,  Spanning Tree, Rapid Spanning Tree, VPC, VSS, VDC, TRILL, Fabric Path, OTV ATM, RTP, SIP, H.323, LWAPP, RADIUS, TACACS+, Ethernet, Fibre Channel, iSCSI, NFS FCIP, FCP, FSPF, NDMP 802.11a, 802.11b, 802.11g, RBE, ISDN, SNMP

Virtualization , Parallel and High Performance Compute Platforms

VMware ESX, Kernel Virtual Machine, Xen, Platform LSF, Sun Grid Engine, Hadoop

VOICE and VOICE OVER IP

CallManager, Unity, ICS7750, PBX Trunking, SRST, Active Directory Integration, Extended Services, Call Detail Recording, Automated Attendant, Extension, Mobility, Asterisk, Callware and VSR VM.

HARDWARE

Cisco Unified Computing System (UCS) 6100, 2100, 5100, Nexus 7000, Nexus 5000, Nexus 2000 and Nexus 1000v switches, Catalyst 1900-6509 switches, 1600-7500 series routers, Cisco PIX firewalls, Cisco Load Balancers, Cisco

MDS , F5 Load Balancers, Netscreen / Juniper Firewalls, Cisco VPN3000 VPN concentrators, Cisco ASA Adaptive Security Appliances, Nortel Contivity VPN Concentrators,  Aironet Access Points and Bridges, Airespace LWAPP

concentrators. 3com TotalConnect racks, Ascend dial concentrators, Netscaler Load balancers, SSL accelerators, SSL VPN concentrators. Brocade Silkworm, HP Eva Storage

NETWORK MANAGEMENT

Nagios, Cacti, NTOP, IPswitch What’s Up Gold, BIG Brother, Spectrum Network Management, Kiwi Syslog,, MRTG , HP OpenView, Cisco Secure Intrusion Detection system,

Cisco Network Based Application Recognition, Snort IDS, Netscreen Firewall Manager, Unified Compute System Manager

OPERATING SYSTEMS

Redhat, Suse and Ubuntu Linux, Windows 2000, Windows 2003, Windows 2008, Windows XP, NT4.0, BSD, Solaris, OSX

BUSINESS ENVIRONMENTS

Consulting, Valued Added Reseller, Large Enterprise, Startup, Banking, Service Provider, Software Development, Manufacturing, Military

EMPLOYMENT

6/11 -  Present , Nexus IS

Director, Data Center Practice

Responsible for got to market strategy for Nexus IS, a national Cisco DVAR.

Accomplishments

• TBD

1/07 – 6/11, ePlus Technology

Consulting Systems Engineer – Data Center (10/08 – 6/11)

Transformed ePlus western region from a #3 and #2 ranked voice and campus partner to the #1 ranked Data Center partner in Northern California

Accomplishments

• Changed regional sales focus from technology silo’s to solutions based selling covering network, systems, storage and applications under one umbrella
• Developed and deployed go to market strategy for Cisco’s Unified Computing System resulting in significant competitive advantage in the western United States.
• Deployed the first Nexus 7000/5000/2000 architecture into production securing competitive advantage across multiple verticals.

• Increased Data Center revenues year over year in the worst economy in a century.
• Attracted and retained top industry talent.
• Leveraged unique technology positioning to win multiple key global clients.
• Partnered with business units inside of Cisco, resulting in key product enhancements as well as increased revenue for both ePlus and Cisco.
• Passed multiple certifications resulting in ePlus being able to sell and install EMC Vblock.

1/07 – 6/11, ePlus Technology

Senior Systems Engineer (1/07 – 10/08)

Accelerate Technical Sales, design and implement network, storage, voice and systems solutions for ePlus Southern California customers.

Accomplishments

• Changed regional sales focus from technology silo’s to solutions based selling covering network, systems, storage and applications under one umbrella.
• Established a trend of Advanced Technology account wins.
• Accelerated ePlus’s southern California sales by providing high-end engineering support.
• Integrated MPLS service provider designs into cutting edge Enterprise and Casino Gaming solutions.
• Filled PM and lead network engineer roles for large publicly traded company data center migrations.
• Created modular Cisco design / quote format and menu based hardware and services options to address rapidly changing customer needs.

9/05 – 1/07 ID Analytics

Lead Network Engineer

Lead team of four engineers, Define network and application integration architecture for large SaaS (financial cloud) analytics deployment , Leverage networking technology to increase security and availability, and decrease development and product deployment timelines

Accomplishments

• Led team of engineers responsible for all Production and Back Office systems in 2 offices and 3 datacenters
• Designed and Implemented ID Analytics Phase2 datacenter, processing 1.8 million financial transactions daily.
• Designed and Implemented Contents Switching and SSL offloading solution, enabled non-disruptive scaling of core products
• Integrated ID Analytics product with the largest card processors in the world – Equifax, Visa, TransUnion, etc.
• Designed and integrated centralized Fiber Channel and ISCSI SAN solution, increasing application speed and decreasing production database refresh times from 4 weeks to 1 week.
• Managed and maintained over 130 terabytes of storage
• Created lights out server imaging and deployment solution for remote datacenters
• Deployed and integrated monitoring solutions utilizing open source technology
• Created user emulation probes for real time application monitoring and trending of production systems
• Worked with development and Analytics to create structured Development and QA environments
• Spearheaded project to change Analytics / Informatics environment from “unix for workgroups” to high performance computing environment (HPC)
• Provide structured documentation to US Government and Corporate auditors
• Utilized project management skills for international rollouts

2/04 – 8/2005 Openwave Systems
Senior Network Engineer, Strategic Design and Integration Group
Provide technical leadership, Define network architecture, Establish standards and technical vision. Responsible for researching, developing, and architecting technical solutions to business needs.

Accomplishments

• Designed Openwave’s new Pacific Datacenter Networks, with 900 production, and 2000 development servers.
• Designed Openwave’s Pacific Shores Campus Networks, and Showcase Datacenter.
• Responsible for hardware acquisition budget of 1.7 million dollars
• Established ISCSI IP based SAN infrastructure with DR components in 4 major datacenters worldwide
• Promoted from the ranks, moving from running our VOIP phone systems, to Network team lead, to Senior Network Engineer in the Strategic Design and Integration team.
• Active and engaged member of multiple boards covering design review, change control, and security
• Negotiated with Cisco and SBC regarding datacenter purchases saving $906,000 off list price.
• Renegotiated Cisco support saving Openwave nearly $600,000 over our three year term
• Established improved data center controls, allowing Openwave to pass Sarbanes Oxley (SOX) audits
• Wrote and ran multiple RFP, RFQ, and RFI’s
• Utilized project management skills for international rollouts
• Managed, Piloted, and Installed new wireless systems for our Customer Briefing Center
• Responsible for 6 VOIP clusters around the world
• Recipient of multiple awards recognizing dedication and quality work.
• Attended continuing training for security management (CISSP)

2/03 – 1/04 USMC Reservist activated in support of Operation Enduring Freedom
Information Services Coordinator
Implement and maintain Tactical Data Networks, Provide consulting services to hosting units. Maintain Microsoft Exchange servers in both tactical and garrison environments. Perform security audits and remediation. Train support personnel.

Accomplishments

• Performed Disaster recovery of routed ATM LANE environment for Marine Corps Air Station Yuma enabling over 3000 users to resume work (awarded the Navy and Marine Corps Achievement Medal for that event)
• Performed security audit and created a security and performance remediation plan for MCAS Yuma
• Provided project management and security audit skills to 3^rd Marine Air Wing Yuma server support teams, managed server security audit, security remediation, and SMS rollout.
• Designed and implemented Nagios network monitoring system at Marine Corps Air Station Yuma.
• Implemented Norton Antivirus server for MWSS 473
• Provided training on to data teams from MWSS 473, MCAS Yuma Station IT, and 3^rd Marine Air Wing Yuma server teams.

12/02 – 2/04 2 Cups Solutions, Pleasanton , Ca
Principal Consultant
Founded 2 Cups Solutions to provide cutting edge Voice, Data, Wireless and Security services to clients in the San Francisco bay and Fresno areas.

Accomplishments

• Implemented WAN failover solution at two City of Hayward fire stations.
• Implemented email and web solution for Express Mobile Notary.
• Developed and implemented business plan focusing on State and Local Government contracts.

2/02 – 12/02 ExtraTeam, Pleasanton , Ca
Senior Systems Engineer
Design, Installation, Configuration and Maintenance of network systems consisting of Cisco CallManager, Unity, Cisco Secure ACS, LEAP secured wireless, Aironet, Cisco routers and switches, PIX firewalls, and VPN3000 concentrators. Integrating all systems with Active Directory. Performed VOIP feasibility studies. Managed the entire business cycle including sales, design, installation, training and maintenance.

Accomplishments

• Integrated CallManager voice system with Active Directory
• Recovered a failed CallManager implementation at Phase 2 Strategies (PR firm for Logitech). Implemented CallManager with up to date hardware and software, upgraded Unity up to reasonably current levels. Brought up remote office in Phoenix utilizing SRST.
• Implemented City wide wireless network integrated with active directory for the City of Hayward
• Implemented VPN Concentrators in conjunction with multiple levels of firewalls for City of Hayward and Hayward PD to meet CLETS requirements.
• Implemented network configuration management system responsible for the city of Hayward.
• Implemented new wan for Livermore Pleasanton Fire department moving fire stations from isdn to T1 and Gigabit fiber lines in conjunction with moving the location for the network core.
• Designed and implemented IPSEC based wan for Universal life resources, allowing nationwide secure remote office connectivity while minimizing wan connection costs.
• Designed CallManager based VOIP system for a 27 site school district
• Provided emergency support to Fire and Police agencies across the bay area
• Performed security remediation for a large bay area company
• Participated in large switched network cutover from 7500 to a 6509 with flex-wan modules for Stanislaus County.
• Achieved technical certifications for ExtraTeam to become certified under both the Wireless and IP Telephony revised specifications.

7/01 – 2/02 Infobond Inc. Burlingame , Ca
Network Engineer

Responsible for engineering duties in a leadership role. Integrated legacy PBX’s using VOIP technology. Used Quality of service to ensure VOIP service levels. Support legacy voice over IP and voice over Frame Relay technologies. Upgrade from legacy voice integrations to state of the art VOIP integrations. Create project plans and act on them.

Accomplishments

• Cut over evergreen lines shipping terminal from legacy 3com equipment to VOIP enabled Cisco routers and switches. Accomplished all work during Union stand downs.
• Contracted to Openwave, Inc. to run Remote Access while the engineer was on leave. Ran Remote Access for 5 weeks, resolving DSL RLAN issues and IPSec issues, while reducing trouble ticket backload to manageable levels. Assisted other engineers when needed.
• Implemented Cisco 6509’s to replace aging core network of a Benchmark Capital (bay area investment firm).
• Diagnosed and resolved VOIP issues that were stopping call center rollouts for Embarcadero Systems (a large bay area shipping company).

03/00 – 7/01 Knapp Publishing Corporation, San Ramon, Ca
Network Systems Administrator

Responsible for day-to-day operations of e-commerce data center, and wide area networks Performed DNS changes for both internal and external networks. Designed, piloted, and implemented network changes. Installation configuration and maintenance of NT, and Windows 2k file, print, and web servers

Accomplishments

• Improved service levels from 90% to 99.99%, enhanced security and increased bandwidth were benefits derived from implementing a state-of-the-art web hosting data center
• Implemented a network monitoring system to document, report, and notify of network status.
• Designed and implemented ISDN failover of Frame-Relay Network.
• Designed, piloted, and implemented network changes.
• Replaced NT servers with Linux based servers, integrated with the Windows network

01/98 – 03/00 DKA Computers Inc. Clovis, Ca
Manager Information Services (01/99 – 03/00 )

Ran day to day operations of a large valley ISP. Worked with systems manufacturing to bundle client software with all new PC’s. Partnered with local ISP’s to provide access numbers across the valley.

Accomplishments

• Managed web development, and professional services
• Moved web hosting from IIS on Windows NT to APACHE on Linux based servers, drastically increasing site availability
• Produced a forms based web application to configure custom systems online.
• Designed and implemented an IPSec based WAN connecting 3 stores point of sales systems.
• Managed corporate office and data center relocation project.

Senior PC Service Technician (01/98 – 01/99)

Provide on call service. Staff PC help desk. Provide direct customer systems support while maximizing company revenues. Configured all servers ordered from manufacturing.

Accomplishments

• Responsible for all day to day service activities for a 13 million dollar company. Management of 4 team members. Directly responsible for customer satisfaction
• Implemented hard drive imaging system, decreasing both warranty costs and turnaround time
• Installed and configured SCO Unix reservation system for National Park service, Kings Canyon
• Deploy Citrix Winframe Systems, Windows NT 4.0 Systems
• Designed, implemented inventory tracking database, reducing required stock on hand by $40,000

MILITARY

1996 – 2004 UNITED STATES MARINE CORPS RESERVE
Have held U.S. Government security clearance – Secret

EDUCATION

Ongoing professional education

Sans CISSP + Track

University of Oklahoma extension – Fire Science

Cisco Networking AcademySimilar Posts:

• What does it take to pass the CCIE exam?
• I’ll be at Cisco Live 2008 (networkers) in Orlando all week
• About Colin McNamara
• Cisco Certified Design Expert – CCDE – officially released by Cisco
• Challenges integrating VMware into Cisco networks
• Darrel Hinshaw – New Triple CCIE [Storage]!!!!!!!

--Colin McNamara

Resume – Colin McNamara, CCIE #18233

Though CCIEs are members of an exclusive group, they can be found in countries on every continent. Use the map and tables below to discover your peers around the world.

Americas EMEA Pacific Rim Africa Asia Cana Europe Middle East Pacific Islands South America United States

Total of Worldwide CCIEs:		15658 (last updated 11.14.2007)
Total of Routing and Switching CCIEs:		14329
Total of Security CCIEs:		1207
Total of Service Provider CCIEs:		650
Total of Storage Networking CCIEs:		99
Total of Voice CCIEs:		601

Multiple Certifications:

Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• Darrel Hinshaw – New Triple CCIE [Storage]!!!!!!!
• What does it take to pass the CCIE exam?
• About Colin McNamara
• Cool new features in 12.4(15)T
• And it begins again – On the road to my CCIE in Storage
• Passed CCDE written and Recertified my CCIE – Killed two birds with one stone

--Colin McNamara

Updated CCIE numbers

* Solid State Drive (SSD) boot support
As initially discovered last month, VMware will make available a special version of ESX Server (mentioned with terms like ESX Lite and Embedded ESX) for OEM vendors, to be installed into bootable Solid State storage devices (flash drives, etc.). This option will allow creation of ESX Server hardware appliances for easy jumpstart, granting smaller form-factors and improved reliability.
Dell, IBM and possibly other vendors will offer this option at announcement time in Q3 2007.
* DMotion
Unofficially introduced with ESX Server 3.0.1, in its first version DMotion is a special VMotion operation only capable of moving running virtual machines from an ESX Server 2.5.x host to a new ESX Server 3.x., without shared SAN LUN mandatory requirement.
In ESX Server 3.1 this capability will be extended, allowing hot migration of running virtual machines between ESX 3.1 hosts through the Ethernet cable.
* Patch management system for host and virtual machines (Update Manager 1.0)
ESX Server 3.1 will finally introduce an automated patch management system called Update Manager. This solution will be able to update both host itself and virtual machines (both Microsoft Windows and Red Hat Enterprise Linux).
Update Manager will look for available updates from Shavlik Technologies website (a possible acquisition after IPO), and will allow VI administrators to decide which patches to deliver to virtual machines.
Before applying them, Update Manager will take a snapshot and will even rollback automatically if something goes wrong.

(this product was originally codenamed VM Integrity and its developement started more than one year ago, when virtualization.info discovered it in June 2006)
* VMware Consolidate Backup (VCB) and VMware Converter 4.0 integration
VirtualCenter 2.1 will now allow restoring VCB images with an integrated version of VMware Converter, which reaches 4.0 release number.
* Server consolidation advisor
VirtualCenter 2.1 will expose a server consolidation assistant able to analyze which physical machines should be converted in virtual ones, and where to move existing VMs among available hosts.
(note that with this feature VMware is further extending competition with PlateSpin, covering both features with PowerRecon and PowerConvert)
* Guest OS disaster recovery capability
VirtualCenter 2.1 will be able to recognize a failure inside a virtual machine and restart it through VMware HA module.
* Support for VMware Server 2.0
VirtualCenter 2.1 will be finally able to seamless manage both ESX Server and VMware Server 2.0 hosts.
* Lockdown Mode
ESX Server 3.1 will expose a new security feature to completely disable local administrative account after a VirtualCenter 2.1 takes remote control.
* Power saving capability (Distributed Power Management)
VirtualCenter 2.1 will introduce a new resources utilization analysis feature, able to verify when a physical host can be powered off, VMotion-ing its virtual machines on other hosts without impacting performances.
* Support for Cisco Discovery Protocol (CDP)
VirtualCenter 2.1 will be able to recognize and use CDP to discover physical and virtual network topologies.
It stays unconfirmed if ESX Server 3.1 will already expose new virtual network architecture, allowing 3rd party virtual switches, as it will be announced by Cisco CEO at VMworld 2007.
* Support for 10Gbit Ethernet network cards
* Support for TCP/IP Offload Engine (TOE) network cards
* Support for network load balancing algorithms
* Support for 200 hosts and 2000 virtual machines
* Support for 128GB RAM per host and for 64GB RAM per virtual machine
* Support for SATA storage devices
* Support for N_Port ID Virtualization (NPIV)
* Support for VCB over iSCSI SANs
* Support for IPv6 in virtual networking
* Support for Para-virtualization guest OSes

Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• Cisco releases Nexus 1000V virtual switch for VMware
• Is your network ready for Cloud Computing with Virtual Infrastructure 4?
• Cisco EMC and VMware partneship VCE VBlocks Acadia and the Partner Ecosystem
• Interesting TechWise TV episode on virtualization
• Cool new features in 12.2(33)SXH
• VMworld 2009 Schedule

--Colin McNamara

New features in VMware 3.1

For those that have been watching, there has been a trend of helpful MDS (Cisco’s director class storage switch) features into core networking products. The first feature I have noticed is the “do” command now available in configuraiton mode in ios 12.4. It allows you to execute exec commands from the configuration section in IOS. Needless to say this is very handy, primarily due to not having to exit to your shell to do a show command.

Things like that make me very happy. They decrease the time needed complete tasks, and improve your accuracy.

One of the features that I have always loved with the MDS is call home. It is a deamon that monitors the hardware and software for faults, and when one is found it posts an email to TAC and your support staff.

This feature now has made it into the 6500 series switches as of 12.2(22)SXH which should be out mid August. It will integrate directly with Cisco TAC, and your own internal Monitoring and management systems. The really cool thing is that this ties right into the GOLD (Generic On Line Diagnostics) tests. If your GOLD tests find a hardware problem TAC will automatically be contacted, a RMA issued, engineer contacted, and parts shipped to the devices location. The target for this is SmartNet time + 1.5 hours. So if you had 4 hour smartnet, you could expect hardware onsite, with no additional troubleshooting in 5.5 hours.

Cisco portal for smartcall is located at http://www.cisco.com/go/smartcall

Colin McNamara, CCIE #18233
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• Cisco NX-OS 4.0 | Next Generation Internet Operating System
• Routers can email you when they go down
• Zone based IOS firewalls
• Cool new features in 12.4(15)T
• What being married to a geek who does search engine optimization gets you
• What does it take to pass the CCIE exam?

--Colin McNamara

The emergence of MDS features in Cisco’s datacenter networking equipment

My background is all over the place. It goes from running a small ISP when I was 18 to managing international CallManager clusters, to enterprise data center design and migrations. I swear that I have tech ADD. I see something new and I am like.. oooooh shiny, lets do a sniff and see how it works.

I actually attempted the Route Switch lab twice in 2002 (still had token ring and dlsw still) but got activated for the war before I could get my number. I can tell you.. that sucked horribly.

So, why did I choose to get my Storage CCIE first instead of finishing up my Route Switch first? Well, over the past couple years I have done a significant amount of IP storage (NFS, ISCSI, ATA over Ethernet, etc) including building my own IP storage heads based on linux. I had also done a little bit of fiber channel work. I felt that I had a significant advantage compared to most network engineers in the storage networking space. And, I think more importantly, the topics that I had to study were new and fresh. Whereas when I cracked open my Route Switch books.. I honestly wasn’t to excited about it at the time ( I think I was holding a grudge from my first attempts in 2002).

The partner e-learning central portion of Cisco has an Excellent lab access to labgear.net. It gives you 2 hour segments of time with 2 mds’s (both with IPS blades), 1 2 port jbod, and 2 2 port servers. They also have introductory tutorials for most major technology segments.

I did all of those, along with the every E-learning class that was on PEC. I think the major ones were the Design, Support, and CASSI classes.I took that, sat for the design and support specialist exams, and took my written last December.

After doing all that work, I was honestly 70% there. I took a little break for january and febuary (There was no open lab dates) and then started hitting the labs I think at the end of febuary.

For the majority of my practice I used the labs available through PEC. I also was able to weasel my way into 8 hour sessions every sunday from our channel SE. (I owe him plenty of drinks at networkers this year) For those 8 hour sessions I had labs created to summarize the major technology areas and to be as evil as possible to myself.

I had one attempt which didn’t work out as well as I would have liked. In RTP the lab starts at 7:15. This means if you are from the west coast like I am you will be getting up at 3:00 am in the morning for your lab. That royally kicked my but. I diverted from my attack plan and ended up
running out of time. It was a classic example of letting the lab run you, instead of you running the lab.

Luckily a data opened up just over a month later. I spent that time just working on my speed (speed is the secret sauce). I migrated to using Fabric Manager (gui interface) instead of command line. After 2 practice runs my time had dropped 25%. I also flew out to RTP 3 days before, and made sure to relax and get on east coast time.

For my final prep I got access to iementor’s lab. Their lab is excellent. I cannot reinforce enough how much it contributed to my confidence in that final week. Roman was really cool about working with an existing candidate to get me squeezed in. They are really cool guys, and they have the only workbook on the market right now.

So, I used their lab 2 days before mine, and then just chilled the day before. The day of the lab I had 70 points by lunch, and had completed configuration of the lab by 12:30. I spent the rest of the day reviewing my configurations (found 2 errors), fixing one bug, and generally harassing the proctor to make sure I didn’t misinterpret anything.

So.. if I had it all to do over again what would I do. I would still do the PEC stuff, and continue to primarily live in the Doc CD. Though I would probably pony up the cash and buy the iementor book and more lab time with them.

Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233
“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• What does it take to pass the CCIE exam?
• Fibre Channel over Ethernet is taking off
• And it begins again – On the road to my CCIE in Storage
• Are you a kick ass engineer looking to grow?
• My CCIE Storage Shopping List
• Where was Colin in 2010?

--Colin McNamara

Why was Storage Networking my first CCIE? And What did I do to prepare?

For those who haven’t heard yet, I passed my CCIE Lab on June 14th. Now I can officially put CCIE #18233 after my name.

Anyone who has been down the same path understands how long of a road this is.
I started down this path in the spring of 1999 as the 432nd student ever in Cisco’s Networking Academy (which I promptly dropped out of to move to the bay area). I grew my networking skills all the way to passing my CCIE Written in 2001. I attempted my Route Switch lab in 2002, however I got called away to war for a year. Being away from it all for a year really cramped my style technically. In that time many of my certs expired, and I lost much of the momentum I had built of the past half decade.

Since I got back to the real world I had focused on work to the detriment of my certifications. I really did some great things, however I really neglected my resume.
In July of 2006 I had worked 2038 hours that year (for those not mathematically inclined, that is a full work year, in 1/2 a year) . At that point I decided it was time to stop neglecting my certifications. At that point I dedicated 8 hours each saturday, along with two nights a week to studies. By December of that year I had Certified on a few of the technologies that I had tons of experience in.

I managed to get my RHCE, Cisco Storage Support and Design Specialist, update my old IP Telephony specialist certifications to CCVP, get my Netapp Certified Administrator, and pass my CCIE Written for storage networking all by the end of the year. This spring I finished my Netapp Certified Expert and scheduled my Storage lab for early summer.

Anyone who knows me well knows how closely I track my time. That time tracking extends to my training. I tracked my training (reading, lab practice, testing, etc) just like any other part of my professional life. I spent around 150 hours studying for my Design, Support specialist certs, along with reading the recommended books of the CCIE reading list, and around 300 hours preparing for my lab exam. That is 300 hours configuring every possible combination and permutation of technology that could be setup, and then refining my speed in configuring those technologies until i got to the point where speed as well as brains would be an advantage in the lab.

So now that I have my CCIE, whats next? Well, oddly enough.. I am thinking of getting my second CCIE cert. In my office I will be the Jr guy by only having a single CCIE (on of our guys has all five). I also need to take my VMware certified professional cert, and probably get my HP Master Accredited Storage Engineer. I guess I am just a glutton for punishment.

Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”Similar Posts:

• Where was Colin in 2010?
• About Colin McNamara
• Updated CCIE numbers
• Why was Storage Networking my first CCIE? And What did I do to prepare?
• And it begins again – On the road to my CCIE in Storage
• Update on the Cisco / Nuova connection

--Colin McNamara

What does it take to pass the CCIE exam?

The first lesson was that knowledge alone is not suffient to pass the lab.
The second was that the lab is not the real world, and the procotors do not intend to replicate real world problems.
The third lesson was that speed is as important as brains.
The fourth lesson is that you can’t make it alone.

This time I am taking a different tack. I am studying with a partner. My focus will not be real world implementations, it will be on all possible hellish combinations a proctor could come up with. . I will be spending many late nights working on my speed.

I have passed All of Cisco’s storage exams, including the Written qualification for the CCIE Storage Networking exam. At first I thought the biggest challenge would be getting ahold of lab gear. It is not like this stuff is cheap. However I have been finding more gear out there then I had though I would. This is a good sign.

I will be posting my experiences throughout this entire process. I am not under the illusion that it will be easy. Luckily I have the lessons learned from my attempts before the war, and a new found enthusiam.

–Colin
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• It’s on like Donkey Kong – CCDE practical registration is open
• What does it take to pass the CCIE exam?
• Why was Storage Networking my first CCIE? And What did I do to prepare?
• 3 minute management course
• My CCIE Storage Shopping List
• Updated CCIE numbers

--Colin McNamara

And it begins again – On the road to my CCIE in Storage

A traditional Christmas dinner in early England was the head of a pig prepared with mustard.

“White Christmas,” released in 1954, starring Bing Crosby and Danny Kaye, was the first movie to be made in Vista Vision.

The holiday classic, “It’s A Wonderful Life,” was originally a box office flop.

The real Santa Claus was born in 280 A.D. as Nicholas. He commonly wore a red and white Bishop’s robe.

“Xmas” is considered by some to be a disrespectful abbreviation. But the Old English word for Christmas begins with X. The Greek word for “Christ,” from which the English is derived, begins with the Greek letter chi, or X. So, X is an appropriate abbreviation for Christ.

The first electric Christmas tree lights were telephone switchboard lights.

About 400,000 people get sick each year from consuming tainted Christmas leftovers.

In 1907, Oklahoma became the last U.S. state to make Christmas a legal holiday.

America’s official national Christmas tree grows in California’s King’s Canyon National Park. The tree is a giant sequoia standing more than 300 feet high, and it’s called the “General Grant Tree.”

Christmas trees are edible. Many parts of pines, spruces and firs can be eaten.

According to the laws of the time, Joseph could have had Mary stoned to death for becoming pregnant.

“Hot Cockles” was a popular game at Christmas in medieval times. In the game, players took turns striking a blindfolded player, who had to guess the name of the person delivering each blow.

Toys for Tots held its first toy drive in 1947.

Boris Karloff was the voice of the Grinch in the animated classic, “How the Grinch Stole Christmas.”

During the Christmas shopping season, Visa cards alone are used an average of 5,340 times every minute in the US

According to a recent survey, seven out of 10 dogs in Great Britain get Christmas gifts from their owners.

“Wassail” comes from the Old Norse term, “ves heill,” meaning “to be of good health.” This evolved into the popular holiday tradition of visiting neighbors on Christmas Eve and drinking to their health.

The average American household will send out 28 Christmas cards each year, and will receive the same number in return.

Boxing Day, celebrated in Canada, has nothing to do with fighting. It refers to the custom of giving gift boxes to employees the day after Christmas. Originally, it was the day Christmas presents were given in England.

Jesus Christ was born in a cave, not in a stable.

The first Christmas card was made in England on December 9, 1842.

The ancient Druids believed the sparks from a burning log carried wishes for a prosperous New Year to the gods, hence the tradition of yule logs.

According to the National Christmas Tree Association, Americans buy 37.1 million real Christmas trees each year.

Charles Dickens wrote several Christmas stories after “A Christmas Carol,” one each year, in fact, but none could match the success of the original.

The Julbock is a common Christmas decoration in Sweden. It’s a small figurine of a goat made from straw.

In Sweden, the “tomte” is a Christmas gnome.

According to “How the Grinch Stole Christmas,” the Grinch was so mean because his heart was two sizes too small.

There are about 5,000 “choose and cut” Christmas tree farms in the US

St. Nicholas is the patron saint of children, scholars, merchants, sailors and women without dowries.
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• 3 minute management course
• CCIE Party 2008 Recap – Cisco Live Networkers 2008
• A little trivia to start the week
• Kylie Launching in Yosemite while sledding
• What does it take to pass the CCIE exam?
• Why GoDaddy Linux Virtual Dedicated Hosting Sucks & How to Fix It

--Colin McNamara

Christmas Trivia

Lets just start this out by saying, darn.. this is going to be expensive.
Now that that is out of the way, lets get started. Cisco publishes the hardware that is in the Storage lab.

Here is the hardware summary -

• Cisco Routers
• Cisco Catalyst Switches
• Cisco Secure Access Control System
• MDS 9506*
• MDS 9216*
• Port Analyzer Adapter
• JBOD
• RAID storage
• HBA
• 3rd Party Fibre Channel Switch

My guess is that this equals a basic routed network with a CS-ACS server on the backend.
It looks like there is also at least 1 pc with an HBA connected into one MDS. The one big question I have is on the connected storage.
My guess is that Cisco’s JBOD reference = Fibre Channel connected storage, and the RAID array mentioned is connected to at least one server.
If my guess is right then there is the 9506 and 9216 – (note, no I in the name) and a third party switch.

So lets start the shopping list.

1. Cisco Routers
I have those coming out of the yinyang, no need to purchase anymore for this lab.

2. Cisco Catalyst Switches
Mine are a little old, but I don’t expect a storage exam to have anything challenging in the switching arena. No need to upgrade there.

3. Cisco Secure Access Control System
Thankfully Cisco provides VAR’s with NFR binders. ACS will be loaded on HMB-SERVER1 in a vmware image. No expenditure needed.

4. MDS 9506*
Holy smokes, this is a lot of money. I have seen them on ebay for $8,000. This includes both sup modules. I would need to buy a line card, which I see going for about 1k. so $9000

5. MDS 9216
Still bad, but not horrible. I just saw one on ebay for $5500. Depending on lab requirements it may be smart just to get to 9216′s. so $5500

6. Port Analyzer Adapter
Best I can find is $2000 refurbished. I have a feeling practicing using this, and seeing the ethereal dumps is going to be integral to success. worst case this is 2k, best case beg or borrow $2000

7. JBOD
Normally you are looking at 2-4k for one of these. My strategy is to find an old Netapp shelf, and low level format it. I found one on ebay that ends in 22 hours for $89. Sounds good to me.

8. RAID storage
I am going with my guess that this is just to facilitate data transfers between storage and host. My tactic is to use the existing storage inside one of my servers. $0

9. HBA
Interesting – Only one HBA .This can be up to $2000 to buy new. Luckily ebay is my friend. I found a qlogic 2340 card for $50. My kind of deal

10. 3rd party Fibre Channel Switch
Luckily Brocade resells to everyone and their mother. IBM, Dell, HP, Compaq, ETC. I have found some Silkworm 2800′s for as low as $50 on ebay.
I do have my eye on a 3800 that is going for $24 right now (I hope it stays low).

So how much is the damage?

$16,700

Holy smokes I could sell my truck just to buy the lab gear.

–Colin
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• Update on the Cisco / Nuova connection
• Why was Storage Networking my first CCIE? And What did I do to prepare?
• CCIE Party 2008 Recap – Cisco Live Networkers 2008
• Cisco Nexus 5020 and 5010 FCOE video ordering guide
• Fibre Channel over Ethernet is taking off
• Cisco Nexus 4000 Blade Switch

--Colin McNamara

My CCIE Storage Shopping List

2. Update the Real Time System config generator

Existing Features-
Generates Content Switching configs from application data
Has a web interface for development access
Notifies help desk
New Features -
Create firewall definition files
Create nagios probe config
Integrate XML submission probe generation
Thoughts
Nice to have, but 90% of the functionality is already there

3. Update Nagios system config generator (nagiosuploader)

Existing Features-
Grabs system info when run locally
Posts configs to monitoring server for processing
New features
Host auditing to determine services monitored
Clean up error condition handling
Web interface for config generation
Thoughts
Having a web interface for users to fill out would lower my workload

4. Automate web application error reporting

Existing features -
None, well.. manually executed text processing on log files. I wouldn’t call that an application
New features -
Automation of customer / error code matrix grep statements
Output in XML / http format web page and email
Text only output in commented form <– text –> for command line mail clients
Thoughts -
Proves the point that certain people can be replaced by very small shell scripts (Unix humor)
Should be a big with with Client services
Could drive the application “digital dashboard”
Should be a fun to practice using AWK for formatting data in a standard output
Serious danger of scope creep
May be better implemented in a MySQL back-end

5. Do some personal growth items

Finish the Vmware image for the 7206 emulator and post to Vmware Technology Network for general use (delete IOS files before uploading)
Read some more of Long’s storage book
Write a sample chapter for Stay at Home Photography
Get GTK pod to run under my cmcnamar account, not root (I think the IPOD’s file system doesn’t like changing ownership or file attributes)
Redo the 2cups homepage
Clean the Garage……..
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• User experience testing – enhanced
• Usability features in Cisco’s Nexus 7000
• Google Translate API and speech recognition
• Why GoDaddy Linux Virtual Dedicated Hosting Sucks & How to Fix It
• RSS feeds – an intranet aggregation solution?
• Cisco NX-OS 4.0 | Next Generation Internet Operating System

--Colin McNamara

What should I do this thanksgiving break?

I found an intersting article on Light Reading
Let me summarize the interesting Items.

Team hightlights
1. Nuova is led by Cisco’s former Chief Development Officer, Mario Mazzola
2. J.R. Rivers, a Cisco Distinguished Engineer who led the team that developed the Catalyst 3750 switch is on board.
3. Tom Lyon, who founded Ipsilion is also on board.

Visibility
This company is almost entirely in stealth mode. No press releases or released products.

Funding
Asside from Cisco’s investments they have refused all offers of VC funding.

Gossip
from Light Reading –

“The startup is presumed to be working on a virtualization project in the storage networking space — at the intersection of storage, networking, and computing.

The idea is that they’re trying to “aggregate compute IO from the server and centralize it into a single or small number of network elements, connected back to the servers via a high-speed low-latency ‘closed’ network,” one source says. This frees up processor memory and CPU cycles so that larger clusters of servers are possible.”

My opinion

I think that Cisco plans to jump into the clustered storage market head first. Netapp has just finished the integration of Spinnaker software with the deployment of Ontap GX. Isilion is making a killing on distributed storage. And everyone in their mother is trying to copy Googles GFS filesystem.

I think that Cisco is going to leverage the recently deployed Storage Services Module with its storage virtualization features to create an abstraction layer between products such as Nuova’s and the classic FC or SCSI connected server.

–Colin McNamara

Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• Will Cisco succede where Sun has failed?
• My CCIE Storage Shopping List
• Interesting TechWise TV episode on virtualization
• About Colin McNamara
• Link Round Up – L2TPv3 FCOE Trill Wounded Warriors
• Featured on Network World – 20 useful sites for Cisco networking professionals

--Colin McNamara

Update on the Cisco / Nuova connection

This news is interesting as it shows that Cisco is continuing their push into the application layer.
Its Application Oriented Networking blade directly competes with IBM. The content services switch competes with Sun, F5, Juniper and Netscaler. If Cisco can bring a distributed backend to the market that integrates smoothly with the middleware solutions they are currently proposing it will be unstopable. Anybody care to jump on this bandwagon?

–Colin
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• New Buzzword Enterprise Service Bus
• San Diego WildFIre Update
• How close did the fire come?
• Great TCL and EEM preso found on IOS hints and tricks -
• Cool new features in 12.4(15)T
• Gall stones update – Kaiser sucks

--Colin McNamara

Will Cisco succede where Sun has failed?

Now this system work pretty good, except when we have to do usability testing. Its just not the same on a XP image, as it is from your laptop, on wireless, at home.. etc etc. So we decide we need some sort of VPN solution into our Exchange staging environment. After not alot of thought, I decide to set up a linux PPTP server. Its a protocol that pretty much everybody can use, pretty lightweight, and free .

I have set these boxes up before, and its not terribly hard. Until I had to do it on VMware. Let me set the stage for you – Redhat AS 3.3 / VMware Esx server / VMware tools installed / 1 nic . One NIC generally isn’t best for a VPN server, so I used Virtual Center to deploy a 2nd NIC to my PPTP box.
For anyone reasonably familiar with Redhat or Manadrake, we are used to installing well known hardware and seeing Kudzu add it on boot. Not this time. I rebooted, Kudzu came.. Kudzu went. I ran Kudzu manually no dice.

I know I know, auto anything never works… So I moved on to manually defining this network adapter. The first thing to check – is it actually plugged in. LSPCI reports the adapter as plugged in, and recognises it as a pcnet32 adapter. Normally I would take this as a positive sign, but not today. I issue IFCONFIG -a , network adapter is still not found. I was definately feeling a bit frustrated at this point. To be sure it wasn’t me, I bugged a friend and a co-worker (remind you of a game show?). Anson, who runs the VMware enviornment tried removing VMware tools, adding them…. still no dice. Shad tried to help through Yahoo, although to no avail.

By this time, I am frustrated, feeling like a moron, and ready for a break.
I went to get lunch from the Cafe, and settled down to eat at my desk.
Funny thing, how when you aren’t thinking about a problem is when you normally think of the solution. Let me give you a little background. Earlier when we were troubleshooting this problem, I googled this usenet post -
http://content.ix2.net/arc/t-4236.html . This fellow describes his headaches with debian, in which he had a very similar problem.

His problem, along with mine was that the proper modules werent loading for his network devices. He had tried, along with me to add the module listing to /etc/modules.conf. The one thing however that I hadn’t tried was manually loading pcnet32 using modprobe.

needless to say, modprobe pcnet32 now sits in my rc.local file. Its lame, but it works.

–Colin
Copyright ©2008 | Colin McNamara | CCIE 18233 | All Rights Reserved”

Colin McNamara
CCIE #18233

http://www.2cups.com

“The difficult we do immediately, the impossible just takes a little longer.”Similar Posts:

• New features in VMware 3.1
• Dragged to the hospital
• Cisco releases Nexus 1000V virtual switch for VMware
• Nexus 5020 – Consolidated 10 Gig Ethernet and 4 Gig Fibre Channel
• Challenges integrating VMware into Cisco networks
• My CCIE Storage Shopping List

--Colin McNamara

Redhat AS3.3 and VMware ESX network issues